Emerson Enardo relief valves get WirelessHART communications

Emerson acquired Enardo, a manufacturer of pressure and vacuum relief valves based in Tulsa, Oklahoma, in late 2013. This week saw the launch of a new wireless enabled version of the Enardo pressure and vacuum relief and safety valve used on storage tanks in the oil and gas, petrochemical and pharmaceutical industries.

Enardo_950_w-bracket

By adding the Smart Wireless monitoring system operating over the Emerson WirelessHART network, the safety valves, normally located on the top of large storage tanks, can easily signal to operators in the control room that they have been triggered to either relieve a pressure or vacuum condition. Such situations can arise as a result of changes in temperature, liquid level, or both, and relief valves are essential to prevent tank over or under-pressure conditions that could lead to structural failure. Enardo pipe-away, vent-to-atmosphere, in-line and end-of-line relief valves are typically installed on storage tanks to control evaporation and fugitive emission losses that result from flammable and hazardous petroleum vapour-producing products. Knowledge of the actuation of such a safety valve enables an immediate response, where needed, to prevent problems which can be related to safety, emissions, and the quality of a tank’s content.

Steve Attri, product manager at Emerson for the Enardo valves, commented: “Until now, PVRVs have remained un-monitored, with none of the feedback loops commonly seen in other pressure control devices. As the tank’s primary pressure control device, this wirelessly-monitored solution can be invaluable.”

Enardo manufactures tank and terminal safety equipment, including hatches, vent, pressure and vacuum relief valves and flame arrestors used in the oil and gas, petrochemical, chemical and other industries. Enardo in-line and stack vent valves have been the oilfield industry standard for more than 80 years.

Prior to the acquisition by Emerson, Enardo had sales of $65m a year, and employed 140 people. It now operates within the Regulator Technologies business, previously known as Fisher Regulators, within Emerson Process Management.

© Nick Denbow ProcessingTalk.info

@ProcessingTalk

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: