ISA Christmas comes with ANSI approval

The following press release was issued by ISA today:

The American National Standards Institute (ANSI) has announced the approval of ISA-100.11a-2011, “Wireless Systems for Industrial Automation: Process Control and Related Applications” as an American National Standard. This approval confirms that the open consensus standards development procedures required by ANSI, which call for participation not only of suppliers but of all key interest categories, were followed in developing the standard.

Most notably, ISA’s ANSI-accredited standards procedures require direct participation and voting by experts from end-user companies, ensuring that their views and requirements are considered in the development process. ANSI/ISA-100.11a-2011 received 92% approval from voting members on the ISA100 Committee who represent end-user companies, where wireless systems might be deployed. The ISA100 Co-Chairs, Wayne Manges of Oak Ridge National Laboratory/US Department of Energy, and Herman Storey, a consultant with 42 years as an end user in the refining and petrochemical industry, have both stated that this approval by end-users sends a strong and clear message to industry.

Approval as an American National Standard follows the unanimous approval of the standard in September as a Publically Available Specification (PAS) by IEC SC65C, Industrial Networks. The PAS approval marked the first step in the progression of ANSI/ISA-100.11a-2011 through the IEC (International Electrotechnical Commission, www.iec.ch) process. A two-day meeting earlier this month of IEC SC65B Working Group 16, Wireless Industrial Networks, resulted in an initial working schedule.

This collaboration with the IEC is the latest in a long line of ISA standards that have served as the originating sources of widely used IEC standards, including:

  • IEC 61511 series: Process Safety (ISA84)
  • IEC 61512 series: Batch Control (ISA88)
  • IEC 62264 series: Enterprise Control-System Integration (ISA95)
  • IEC 62443 series: Industrial Automation and Control Systems Security (ISA99)

ANSI/ISA-100.11a-2011 was developed to provide reliable and secure wireless operation for non-critical monitoring, alerting, supervisory control, open loop control and closed loop control applications. The standard defines the protocol suite, system management, and gateway and security specifications for low-data-rate wireless connectivity with fixed, portable and moving devices that support very limited power consumption requirements. The application focus is to address the performance needs of applications, such as monitoring and process control, where latencies on the order of 100 ms can be tolerated, with optional behavior for shorter latency.

Editors note:

The IEC schedule is not defined here, in the ISA press release.

The message to industry from the two ISA100 co-chairmen was not defined.

The validity of ISA’s ANSI-accredited standards procedures has been the subject of some discussions in the past.

Other ANSI and IEC wireless standards already exist.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: